Product Description Description China Artificial Quartz Stone Material High purity acid-washed 93% quartz stone grain, 7% resin and a small proportion of inorganic pigment. Thickness 12mm, 15mm, 18mm, 20mm, 25mm, 30mm, etc. Finish 1. Surface: Honed, Polished/Nano 2.Side Finish: UV Cutting. Color...
SQ7121 Glacier white
High purity acid-washed 93% quartz stone grain, 7% resin and a small proportion of inorganic pigment.
12mm, 15mm, 18mm, 20mm, 25mm, 30mm, etc.
Surface: Honed, Polished/Nano
The pure series, diamond series and multi color series, acailable in all designs and colors.
1x20“container， mixed order accepted.
T/T or L/C.
NSF, CE, SGS, GREEN GUARD
Laboratories, Hospitals, Bars, Kitchens, Vanities.
Other Products Show
Why Choose Yeostone
Artificial Quartz Stone VS Natural Marble
High temperature resistance
Its melting point is 1300℃,temperature resistance is 300 ℃.
Metamorphic rocks, if the temperature is more than 650℃, it will decomposed.
Drop the soy sauce, vinegar, coffee on the quartz stone, and wipe it with detergent water after 24 hours, then observe if its surface color change or not.
Mainly made of calcium carbonate, the surface is more easily to be penetrated.
Put the quartz stone in size 10 mm × 30 mm on the open fire, the strip can’t burn.
Marble is a kind of incombustible materials.
Acid and Alkali Resistance
Erode the quartz stone surface with 3% hydrochloric acid solution, etc. And no visible change at the quartz stone surface.
There would be chemical reaction between marble and acid solutions. It is easier to be eroded.
Water Absorption Rate
Standard according to SN / T0308-1993, about 49.35 Mpa.
Slightly inattentive will cause fragmentation and influence the utilization rate.
Standard according to SN/T0308-1993,about 187.75 Mpa.
Natural marble is fragile, especially the long board.
Radioactive limit indicators
No radiation, internal and external radiation index is in line with GB6566-2001.
Higher than quartz stone, ＜ 0.23.
The glossiness range is 70-85 degrees.
About the Quality
1. Thickness: Quality allowed +-0.5mm. In production, we will measure the thickness three times to make sure it is qualified.
2. Size: We will make the slab 20mm longer and wider to make up the lack of corner problem that possiblely happen.
3. Production line QC will inspect the slab surface meter by meter to make sure the there are no bubble and other quality problem.
4. General QC will inspect the quality again, to make sure the whole quality is good.
5. We supply two years's quality warranty, if you found any quality problem within two years after you received the slabs, you can contact with our saler.